To take advantage of better technology and current tax credits, wind farm owners are repowering their sites, often before the end of the turbines’ expected service lives. Through repowering, owners can boost power capabilities, sometimes by running fewer machines, as well as add to the grid without investing in an entirely new farm or experiencing issues related to permitting or electrical interconnections. Barr recently helped one of the largest clean energy developers in the United States repower its 150-megawatt wind farm.
The client wanted to replace existing turbines with new models and hired Barr to perform a structural assessment. Such an assessment is key in repowering because manufacturers have particular specifications for the foundations that support their turbines, and if these aren’t met, a turbine can be unsound.
Barr first conducted a desktop evaluation to determine if the proposed foundations could support the new loads. In this instance, industry design practices for anchoring the turbine towers to their foundations had changed since their original design. We developed a calculation procedure based on an analogous design formula and our knowledge of historical foundation performance. Our initial determination was that the new specifications could be met.
To validate this finding, Barr selected a subset of foundations at the site for further inspection and testing. Field investigation involved structural health monitoring (SHM) to determine each foundation’s performance while its turbine was operating. We also performed visual inspections and coring inside the foundations to check for cracking or hidden issues.
For clients, these investigation results sometimes can be a gray area; Barr specializes in evaluating risk and helping clients make informed decisions about moving forward. At this site, we determined the foundations could support the new turbines without costly modifications. Our team also developed a foundation risk-management program that consisted of performing SHM on select foundations over specific intervals. This recommendation allowed the client to move ahead with repowering while continuing to produce power for 40,000 households.
Looking for a smart solution related to repowering at your site? Contact us.
Brian Tri, vice president, senior civil/structural engineer, specializes in steel and concrete design for foundations, buildings, and other structures. He has served as design engineer, project manager, engineer of record, and principal engineer for wind-turbine foundations on more than 100 new and repowered wind projects across the country. Brian is a member of the Barr team that provides pre-repowering assessments as well as structure and post-construction inspections for wind power projects. He also helps oversee damage evaluations for wind turbine towers and foundations, which involves site investigation, nondestructive testing, and structural analysis.
Wes Karras, structural engineer, is Barr’s wind-turbine-foundation field program manager and a member of the team that provides pre-repowering assessments as well as structure and post-construction inspections for wind projects. He coordinates foundation inspection and structural health monitoring activities related to wind-turbine-foundation assessments, including repowering. Wes has six years of experience in the wind industry and has served as the design engineer, structural inspector, and project manager on numerous wind power projects across the country.
Foundation assessment a critical first step for wind repowering
New heat-sensing drone sees the unseen
Natural resources plan addresses city’s changing ecosystem
To heal nutrient-impaired lakes, apply persistence and resourcefulness
EPA proposes maximum contaminant levels for six PFAS
Two projects honored for engineering excellence
Receive the latest editions right to your inbox and explore industry trends, projects, and company news.
New wastewater discharge standards for coal-fired power plants
Hometown flooding experience inspires career aspirations
Choose your own adventure as an intern at Barr
Internship offers real-life experience in the Canadian oil sands
EPA finalizes GHG standards for electric power generation industry
Improving the ecological health of natural areas within your park system
From teenage errand boy to chief marketing officer
Ready or not, artificial intelligence is here to stay
Certain PFAS now designated as hazardous substances under CERCLA
EPA releases maximum contaminant levels for PFAS in drinking water
Envisioning reuse: The next chapter in the story of industrial water
Hear more about water reuse from Barr's experts
Project: Turning a facility’s wastewater into process water
Project: System evaluation to achieve zero liquid discharge
Navigating the storm: Effectively managing industrial stormwater
Seeing the picture below ground
New PFAS reporting requirements under TSCA
Engineer makes a career, and a hobby, out of modeling
Addressing water scarcity: A case study on aquifer storage and recovery projects
Stack test method OTM-50 announced to measure PFAS in air emissions
Q&A: From operations-based site experience to practical geotechnical mining solutions
Revolutionizing tomorrow through technology and innovation
Cost of removal and destruction of PFAS from wastewater effluent
4,000 wetlands and counting: Journeys of a wetland ecologist
Managing risks when decommissioning PFAS-impacted facilities
Developing a sustainable mine closure vision
Ecosphere Environmental Services, Inc. staff join Barr
A zoo with a view: Treetop Trail opens
Clean water for the Yanesha people of Peru
Adding RNG to your energy portfolio
Happy holidays from all of us at Barr!
Watershed-wide analysis improves strategies to manage climate change
An ecosystem approach to watershed planning and water resource protection
Stormwater O&M: When construction ends, the work begins
How will changes to the TRI/PFAS reporting rule affect your facility?
Barr brings a straightforward approach to Minnesota PFAS cost estimate study
Diving into the data as an air quality specialist
How safe is your tailings dam?
New technology expands access to solar energy
Slope repair puts solid ground under the skis
Creative solutions result in time and cost savings for clients
University flips the switch to “dark-sky-friendly" lighting plan
EPA program connects partners for sediment restoration
MSHA proposes new silica-exposure standards
The evolution of PFAS analytical methods over the last decade
Mining the Intermountain West: From operations to consulting
Six reasons to add RNG to your energy portfolio
Balancing power generation with air quality compliance
Wind turbine foundations now and in the future
Summarizing recent changes to NEPA
Making the most of every opportunity
Gaining real-world experience through Barr’s internship program
From a client’s perspective
Using waste heat recovery for carbon management
Minnesota's mine-reclamation legacy enters exciting new chapter
Building climate resilience through green infrastructure design
Navigating CCR compliance under recent EPA determinations
Municipal waste stream PFAS removal and destruction: Current alternatives and cost
EPA proposes rule to reduce ethylene oxide emissions from commercial sterilizers
Barr celebrates Founders Day: A CEO’s perspective
Five steps to develop a greenhouse gas inventory for agricultural manufacturing
How will the new PFAS MCLs affect NPDES permits?
Time to repower your wind energy site?
Adding lithium to mining operations: Environmental, permitting, and ESG factors
Adding lithium to mining operations: Engineering and design factors
Collecting data from the skies with reality capture technology
Green infrastructure and stacked-benefits projects
EPA proposes maximum contaminant levels for six PFAS in drinking water
Minnesota DNR releases new commercial solar siting guidance
Emerging PFAS destruction technologies
The Inflation Reduction Act: Manufacturing focus
Domestic uranium production on the rise
EPA's latest proposed rule eliminates PFAS reporting exemption
Introducing Barr’s ugly holiday sweater contest winner
Civil designs create homes for the holidays
Designing Africa's first potash processing facility
Q&A: Are mussels impeding your underwater project?
EPA begins enforcement of coal-ash disposal rule
Floodplain management expert joins Barr
From our CEO
Designing Africa’s first potash mine
The Inflation Reduction Act: Mining focus
The Inflation Reduction Act: Power focus
A deeper look into the promising new PFAS destruction approach
Tailings storage facilities: A unique challenge for a critical industry
The Inflation Reduction Act: Fuels focus
Making an impact in the Rocky Mountain Region
From Boy Scout to Senior NEPA Consultant
Stabilizing a community's backup water supply
Q&A: In your ESG journey, keep the destination in mind
Inflation Reduction Act opens door for energy investment
Reviving landings on Lake Michigan's Plum and Pilot Islands
PFAS: What’s all the hype?
Becoming an environmental engineer: A problem solver’s dream career